Ring doorbells have rapidly increased in popularity as a necessity for home safety.
Nonetheless, if your home is made of bricks, installing a Ring doorbell can be tricky because of the need to drill holes in the surface.
Thankfully, there’s always a way out of any jam.
There are primarily three methods for mounting a Ring Doorbell on masonry without drilling:
- The official bolt-on installation
- DIY adhesive tape method.
- Replace traditional drilling with a hole in the mortar.
The surroundings, the siding, and the risk of damage all play a role in helping you decide between these alternatives.
I’ll be discussing the many options for mounting your Ring Doorbell without having to drill holes in your walls throughout the rest of this piece. You will find out the benefits and drawbacks of each choice so that you can make an informed decision.
1. The Official No-Drill Mount
The approved no-drill mount that the company supplies is the first option for placing your doorbell on brick without drilling.
The mount is made with double-sided glue that is both strong enough to retain your doorbell and easy to remove, preventing any potential harm to your home.
The official mount is a good choice because it fits the Ring Doorbell perfectly.The official mount is a good choice because it fits the Ring Doorbell perfectly.
It will securely attach to the doorbell without causing any problems.
If you live in an area prone to rain or have an open porch, you’ll appreciate that the official mount is waterproof.
Sadly, this product is not without its flaws.
Primarily, it’s more costly than do-it-yourself alternatives.
It’s not included in the basic Ring Doorbell package and must be bought separately.
Also, it isn’t much better than the other options, and many users still have problems with it.Also, it isn’t much better than the other options, and many users still have problems with it.
Also, it’s meant to adhere only to perfectly smooth surfaces, so if your home has textured siding like brick, you maymay have trouble getting it to stay put.
Although several customers have reported success with the mount adhering to rough surfaces, it may be unwise to spend so much money on something that isn’t guaranteed to work.
2. The DIY Double Sided Tape Method
If the official mount seems appealing but you’re hesitant to spend so much money on something that might not even work, you might be able to get by with a homemade solution involving tape.
It’s similar in idea to the official mount, using double-sided glue, but it’s far more affordable.
A simple application of double-sided tape (available cheaply at any hardware shop) solves the problem.
This method’s primary advantage is its low cost.
All you have to pay for is tape, which is cheap in comparison to the official mount.
You can also use any kind of glue you want, from high-strength industrial tape to waterproof tape if you live in an area with a lot of moisture.You can also use any kind of glue you want, from high-strength industrial tape to waterproof tape if you live in an area with a lot of moisture.
Put your doorbell on the wall with industrial-strength tape and forget about it for years.
A weaker tape will prevent any damage to your home from the adhesive if you ever decide you need to remove it in the near future.
Better adhesion means more tape can be used without worrying about peeling off the brick.
You will be able to get any details you require.
The official mount comes with no room for negotiation.
If you use industrial-strength tape, there’s a risk that you’ll harm your home when removing it.
The official mount has an adhesive made with removal in mind, while the industrial tape does not.
The design ensures that it will remain attached for as long as possible, regardless of the environmental stresses it faces.
The removal process could be difficult if you’re concerned about the paint’s condition.
It’s possible to use a tape with a weaker adhesive if removal is a major worry.
The biggest problem is that it won’t last as long as other choices, especially in humid areas.The biggest problem is that it won’t last as long as other choices, especially in humid areas.
2. Drill Into the Mortar Instead
Although I realize this article is supposed to discourage drilling, if you’re dead set on preserving your bricks, it might be worth a try to bore holes in the mortar.
Contrary Contrary to popular belief, drilling into the mortar belief, drilling into the mortar is a safe way to gain entry to a home without inflicting major structural damage.
Brick walls rely on the mortar between them to stay together.
When dealing with little, isolated damage, it is also rather simple to repair.
The only thing left to do after taking out the screws is to patch the holes with cement.
Make sure there’s enough mortar between the bricks to hold the screw in place.
Unless it’s noticeably thicker than the screw, you should probably look elsewhere and stick with adhesives for your home.
Just drill straight in, and be cautious to avoid the bricks and tile that make up the mortar.
One should avoid nicking a brick on the inside.
InIn contrast to mortar, which is easily patched, brick is notoriously difficult to fixpatched, brick is notoriously difficult to fix.
Conclusion
It may seem hard to install a Ring doorbell doorbell without first drilling into the brick, but with enough forethought, it is achievable.
Keeping your siding in good condition is a top priority, and the official mount is built with easy removal in mind, so it’s the ideal choice if that’s your main concern.
It’s possible that industrial-strength double-sided tape is the best option if durability is your top goal.
The final piece of advice is to just drill into the mortar if preserving the bricks is your primary concern. Once removed, it can be easily repaired and is not complicated.
