How to Install Chicken Lights on A Semi

The addition of chicken lights to your semi-truck is a terrific method to increase your visibility on the road and make you more visible to other motorists. This tutorial will show you step-by-step instructions for mounting poultry lights on the roof of a semi. Stay with me here, and I’ll fill you in on everything.

What Is a Chicken Light?

Chicken lights are a type of auxiliary lighting that is commonly found on semi-trucks and other commercial vehicles.Named for their resemblance to a chicken’s head, these lights are frequently employed as an alternative to or in addition to standard headlights and taillights. Your visibility on the road can be increased with the help of chicken lights, which also help other motorists spot you.

It’s crucial to get the correct chicken lighting for your needs from among the many varieties on the market. Chickens can benefit from LED lighting because it lasts a long time and uses little electricity. But the size and brightness of the lights must also be taken into account to make sure they can be seen.

Why Should You Install Chicken Lights on A Semi?

To operate their vehicles safely, semi-truck drivers require chicken lights. They make the truck more noticeable to other motorists and aid in increasing visibility.
In order to increase visibility, trailers often have a second pair of lights, known as “chicken lights,” attached to the back. Other motorists will have an easier time seeing the trailer as a result. In low-light situations, chicken lights can also increase your rig’s visibility. Chicken lights are helpful when driving at night or in fog because they light up the road ahead, making it easier to see and making it less likely that you will get into an accident.

There is no better solution than chicken lights to increase your vehicle’s visibility and road safety. You may help ensure the safety of yourself and other drivers on the road by fitting your semi with lights reminiscent of those used to illuminate chicken coops.

Things You’ll Need

  • Flashing chicken lights
  • Drill
  • Holders for attachments
  • Cable sleeve

How to Install Chicken Lights on A Semi Step by Step Guide

Step 1: Mark the Areas

Before putting up the chicken lights, you need to measure the space and make some marks. If you want your lights to be precisely placed and symmetrical, you’ll need to be accurate.

Step 2: Drill Holes

You then need to make four holes in the roof of your semi’s cab. When you do this, the wires for your bird lights can be hidden inside the cab. Make sure to line up the holes again to give your light installation a professional look. Before drilling the actual holes, create a pilot hole with a smaller bit. After that, you can use a larger drill bit to make the holes the right size.

Step 3: Place the Lights

The actual chicken lights need to be set up at this point. You should first install a light in each of the cab holes you drilled. Connect the lights to the batteries and fasten them in place using screws or bolts.

Step 4: Select the Power Source Wire

Chicken lights can be hardwired to the battery or connected to a switch. Connecting the lights directly to the battery will make the light show run on its own. If you do this, the lights will come on as soon as you start the car. However, wire the light show to a toggle switch, however, and you’ll have complete control over when the show begins.

Step 5: Connect the Dots

The chicken lights can be wired in whichever way you like once you’ve made that decision. If you are hardwiring the lights to the battery, connect the positive wire to the positive terminal and the negative wire to the negative terminal if you are hardwiring the lights to the battery.
Connect the positive wire from the light fixture to the toggle switch and the negative wire from the switch to the ground.

Stage 6: “Turn on the Lights”

Make sure the chicken lights are functioning properly after they have been set up. Put on your semi’s headlights, then your chicken lights. LED lights are visible through the polycarbonate lens. You should be good to go if everything checks out. Have fun with the new chicken lights when driving at night.

Step 7: Get Help From an Expert (Optional)

There are services available to install poultry lights on your semi truck if you don’t feel like doing it yourself. If you want to save money, it’s a good idea to compare prices from multiple service providers before making a final decision.
The time to start working on the chicken lights for the semi has come. Make a plan for where you want to put the lights and then drill the holes. Finally, insert the lights into the openings and fasten them in place using the appropriate hardware. Finally, plug in the lights and give them a test.

What Is the Alternative to The Chicken Light?

There are a few options aside from chicken lights that you might think about. LED strip lights are an alternative. These lights can be used for many different things, like under-cabinet lighting, accent lighting, and even task lighting.
Rope lights constitute an additional viable alternative. Rope lights are versatile and can be used to create a number of different styles, including jolly holiday decorations, making them a popular choice for both indoor and outdoor use. Last but not least, you might also think about using neon lights. In order to provide a dramatic effect, neon lights should be used.

Some Consideration Things

  1. While shopping for poultry lights for your semi, get a high-quality device that is rated for outside use.
  2. Be sure to pay close attention to the directions so that you don’t hurt yourself.
  3. If you are uneasy about putting in the lights yourself, call an electrician for assistance.
  4. Before setting out on the road, check that the lights are in good working order.
  5. You may now drive at night with peace of mind thanks to your new chook lights.

If you want to illuminate a semi-trailer, how do you do it?

You can install lights in a semi-trailer using one of two methods. First, you can stick the lights to the inside of the trailer with double-sided tape. The fastest and easiest technique to install lights in a semi-trailer is also the least safe. The second option for installing lights in a semi-trailer is by means of a bracket. While this is the safest method for installing lights in a semi-trailer, it is also the most time-consuming.

The alternative is to cut holes in the trailer and screw the lights in. While this option takes more time, it provides a higher level of safety. Lighting a semi-trailer properly requires installing lights in a uniform pattern across the interior. Additionally, exercise caution when drilling holes in the trailer to avoid damaging the framework.

Does Anyone Know the Procedure for Putting Underglow Lights in a Semi?

The addition of under-grow lights to your semi-truck will help it stand out in traffic. There are several options for accomplishing this, but LED strips are currently the most commonly used. You can find these in a rainbow of hues at any auto parts retailer.

Step one is to thoroughly disinfect the location where the strips will be installed. Doing so will aid in ensuring a good bond is formed. Mark the desired positions of the strips with a measuring tape.
After taking the necessary measurements, remove the strips’ protective backing and trim them to fit. After that, affix them to the desired surface and connect them to a power supply. Your semi-truck can have its own distinct look with a minimum of effort and time spent on the project. If you want to learn more about semi-chicken lights and how to install them, read on!

I need to know how to rewire a semi-trailer.

Removing the old wiring and subsequent installation of the new wiring is required when rewiring a semi-trailer. As a first step, you’ll need to take out the battery and the old wiring. After the old wiring has been taken out of the wall, you may begin installing the new wiring.

First, attach the positive terminal of the battery to the positive wire, and then the negative terminal of the battery to the negative wire. After you are done with the new wiring, reconnect the batteries and turn on the lights to make sure everything is operating as it should.

Frequently Asked Questions

To explain, what do chicken lights mean on a semi truck?

To illuminate the road behind a semi-truck, a special set of lights called “chicken lights” can be mounted on the trailer’s back. They illuminate the space behind the truck, enhancing the visibility of the road. When used properly, chicken lights can keep people safe and possibly assist avoid accidents.

What the heck is the deal with those chicken lights, anyway?

Where you live makes a difference. For instance, whereas some jurisdictions have strict prohibitions against even having poultry lights mounted on a truck, others have fewer restrictions on their use. This means that before you put bird lights on your car, you need to check the rules in your state.

Must Cab Lights Be Installed On Semi-Trailers?

The absence of cab lights in semis is not mandatory. The safety concerns necessitate its use in many jurisdictions. To that end, if you plan on operating a truck in a jurisdiction that mandates cab lights, you’ll need to have some.


Chicken lights on a lorry are easier to install than you might think. You just need a few simple tools and a little bit of time to complete the operation successfully. If you can follow these directions, you’ll have your bird lit up and running in no time. Thank you for taking the time to read our guide on semi-chicken-light installation.

About The Author

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top